The No. 528 Cutter Inspection Machine provides a means whereby a complete
inspection of blade angle and radial truth of Gleason spiral cutters may be
easily accomplished. With optional adapters, the machine can also be used to
check blade angle and radial truth on No. 114 CONIFLEX cutters as well as the
positive seating of segments on REVACYCLE cutters.
With the proximity-type gage, cutter blades can be checked for radial position
to within +.000010" (.2 microns) from the master blade. The cutter blade angle
can be checked to within a +.000020" (.4 microns) tolerance.
In the proximity gaging system, the electronic measuring unit measures the air
gap between the probe and the blade edge without contact taking place. More
accurate readings are not affected by the minute surface variations which
affect readings of a contact type probe.
This machine can handle 3 1/2" to 21" spiral cutters, 15" CONIFLEX cutters and
16" - 25" REVACYCLE cutters.
Conventional Spiral Cutters (Standard): 3.5" - 19.7"
Coniflex Cutters: 15" (Inserted Blade)
Revacycle Cutters: 16" - 25"
Floor Space: 31" x 38"
Net Weight: 1,900 lbs
Shipping Weight (Boxed for Export): 2,500 lbs
Size of Case: 48" x 43" x 69"
to complete inventory display
to our home page