The 17M Hypoid Tester is designed for testing the running qualities of
straight bevel, spiral bevel, zerol bevel and hypoid gears whose shafts
intersect at 90 degrees. There is a pre-set backlash control mechanism to
assure increased accuracy and production of testing.
ACURITE Digital Readout
Backlash Setting Dial 0.001
Sequence of Operations
Drive Spindle Bore: .00015
Drive Spindle Face: .0001
Driven Spindle Bore: .00015
Driven Spindle Face: .0001
Max. Diameter of Gear: 20"
Speed of Drive Spindle: 1200 rpm
Max. Offset of Gear Spindle Above or Below Center of Pinion Spindle: 3 1/2"
Max. Distance from Center of Gear Spindle to Nose of Pinion Spindle: 12"
Min. Distance from Center of Gear Spindle to Nose of Pinion Spindle: 4 3/4"
Max. Distance from Center of Pinion Spindle to Nose of Grear Spindle: 10 3/4"
(Hydraulic Machine has 3" Additional Movement for Withdraw of the Head)
Min. Distance from Center of Pinion Spindle to Nose of Gear Spindle: 3 1/2"
Belt (3 Required "V" Type): No. B75
Horse Power of Motor Required: 5
Floor Space: 53" x 59"
Net Weight (Approximately): 4,500 lbs
to complete inventory display
to our home page